You have no items in your shopping cart.

Blog

Putting up Drywall

Thursday, July 27, 2017 Comments (0)

Putting up Drywall



Setting up Drywall, or hanging drywall as the specialists typically describe the job, can be done by the house owner. It is typically best done with 2 or more individuals as it needs considerable lifting of heavy product. Taping and mudding can likewise be carried out by the house owner, nevertheless these jobs need some practice and artistry.


Purchasing and determining Drywall


Prior to really hanging the drywall, the product initially requires to be purchased and provided. The outcome needs to provide you the number of 4' x 8' sheets of drywall needed for the task. Drywall does come in bigger sheets, such as 4' x12', nevertheless for a Diy property owner these bigger sheets can end up being unwieldy and perhaps even difficult to bring into the existing house.


For restrooms or other wet locations Greenboard need to most likely be utilized as this product is moisture resistance.


For restroom locations where ceramic tile is to be used, e.g. Shower/Bathtub locations, Concrete board ought to be utilized. The concrete board is likewise described as Wonderboard or Durock.


I would recommend 1-2 containers per 500 square feet of drywall. Fiberglass tape is rather economical so I would recommend choosing up 2 to 3 functions for the majority of Diy drywall jobs.


Drywall screws or ringed nails will likewise be needed. Normally I utilize 1.25" length screws or nails. Strips of corner bead will be needed.


Drywall Tools


Prior to beginning drywall setup, you require to acquire the correct tools. A Drywall Lift actually comes in convenient when hanging sheetrock/drywall on the ceilings. The Jack can then be utilized to hold up the drywall to the ceiling while it is screwed/nailed into location.
In addition to the Lift or Jacks, a drywall screw weapon, hammer, T-square, carpenters knife, drywall saw and a keyhole saw are needed. The keyhole saw is utilized for cutting around electrical boxes.


If taping and mudding are to be carried out then Taping knifes, a Corner knife, sand paper, a pole sander and a Mud easel or pan will be essential. For the taping knifes you will require a 6" large blade and a 12" broad blade.


Preparing the website for Drywall


Prior to hanging the drywall, make sure the structure inspector has actually initially authorized the Framing, Pipes, Electrical and Insulation tasks. A vapor barrier must be used over the insulation on the outdoors walls if un-faced insulation was set up.


Guarantee that nailers (e.g. 2" x 4" s) are current at each corner and header, that the framing is directly, and that the framed walls produce smooth aircrafts. In addition, the ceiling must have strapping used (1" x 3" cross boards).


Security


Drywall setup is unclean, heavy work. The Plaster in drywall can be annoying to the sinuses, eyes and lungs so use security goggles and masks to prevent breathing in the product. Gloves are likewise suggested to secure versus sharp blades.


Putting up Drywall


Utilize the Drywall lift or Jacks to hold the sheets in location while screwing or nailing them to the ceiling. Nails or screws must be used every 8 to 12 inches on each stud. It is best to attach the screws/nails to the edges of the drywall initially and then fill in the field later on.
Rows of drywall ought to be used in a staggered pattern. This will produce an interlocked pattern that develops a tighter and more powerful ceiling/wall.


After the ceiling has actually been finished it its time to move on to the walls. Drywall must be used from the top down, with the sheets hung perpendicular to the flooring joists or studs.


For functions of effectiveness and strength it is best to use the big sheets of drywall over the doors and window openings and eliminate the excess later on. This will develop stronger/cleaner looking walls and conserve substantial time.


Setting up Corner Bead


As soon as the drywall has actually been set up, corner bead ought to be used to all outdoors edges. Corner bead must be nailed every 6-8 inches and permeate the framing.


Taping and Mudding


Use a skim coat of joint substance over the surface area of a joint utilizing a 6" broad taping knife. While the Joint substance is still damp, use the fiberglass tape over the skim coat of Joint Substance. When the tape has actually been set up, use extra Joint Substance over the tape, once again utilizing the 6" large taping knife.


The within corners are typically the most challenging and need practice. Persistence is the very best recommendations and note that extra coats will be used later on to ravel any flaws.
As soon as the joints are done, utilizing the 6" large taping knife, use mud to all the screw/nail dimples. A skim coat is all that is at first needed.


Keep in mind: When using the mud over the tape and screw/nail dimples, make certain all excess product and unequal spots are smoothed down with the blade. This will decrease sanding later on.


As soon as the ceiling is done, you can proceed to the walls. Repeat the very same procedure, nevertheless with the outdoors corners simply use a liberal coat of joint substance to the valley that is formed by the corner bead. This valley normally represents the very first 3 or 4 inches from the edge of the corner.


When the very first coat has actually been used let it sit over night or till it is dry, previous to beginning the 2nd application of Joint substance. Make certain to entirely wipe the taping knife, the mud easel and other containers or instruments that have mud on them prior to ending up for the day.


Using the 2nd Coat of Mud


After the very first coat has actually completely dried, it is now time to use the 2nd coat of mud. It is this coat that ought to conceal the tape.


Utilizing the larger taping knife use a generous quantity of joint substance over the taped joints as you desire to develop up the location over the tape. Taking big strokes smooth the joint substance over the tape using more pressure to the side of the taping knife even more away from the tape.


After the joints have actually all been finished, use a 2nd coat of mud over the screw/nail dimples. With this 2nd coat, flare out the mud over the dimples such that the size of the mudded location has to do with 3-4 inches in size.


Use a generous quantity of joint substance and then run the Corner knife down the corner beginning from the top. A 6" taping knife might likewise be useful to smooth out any flaws.
For the outdoors corners, utilizing the broad taping knife use a generous quantity of joint substance and flare out the product such that it extends out 6 inches or two from the corner. Once again, use more pressure to the blade side that is even more far from the corner so that you leave more mud nearer the outdoors corner.


When the 2nd coat has actually been used let it sit over night or till it is dry, previous to beginning the last application of Joint substance. Make certain to entirely wipe the taping knife, the mud easel and other containers or instruments that have mud on them prior to ending up for the day.


Using the Last Coat of Mud


After the very first coat has actually completely dried, it is now time to use the last coat of mud. It is this coat that needs one of the most artistry and the least quantity of joint substance. Here you are merely using a last skim coat to the currently mudded locations.
Prior to using the skim coat it is best to take your broad taping blade and gently pass over the mudded surface areas. This will eliminate any ridges or bumps.


Once again begin with the ceiling joints and use a little quantity of joint substance utilizing the broad taping knife. Once again continue to flare out the joint by extending the mudded location such that about 6 inches lives on each side of the now unnoticeable tape.


After the joints have actually all been finished, use a last coat of mud over the screw/nail dimples. With this 2nd coat, flare out the mud over the dimples such that the size of the mudded location has to do with 6-8 inches in size.


For the corners utilize the broad taping knife and include simply enough mud such that you can flare out the mudded area to about 8-12 inches, making sure to completing any dimples or lines.


As soon as the last coat has actually been used let it rest over night or up until it is dry.


Sanding


Sanding is a filthy and extremely dirty mess so please usages safety glasses and a mask. I discover it finest to utilize a pole sander with an open evaluated sand paper product particularly developed for sanding sheetrock/drywall mud.


Gently sand all the taped locations, nevertheless focus sanding on the external edges of the mudded locations such that ridges and joints are gotten rid of and mix into the primary area.
Vacuum up the dust and you are all set for priming and painting the walls and texturing the ceilings as soon as sanding is total.



Drywall ought to be used from the top down, with the sheets hung perpendicular to the flooring joists or studs. While the Joint substance is still damp, use the fiberglass tape over the skim coat of Joint Substance.

As soon as the tape has actually been set up, use extra Joint Substance over the tape, once again utilizing the 6" broad taping knife. Utilizing the larger taping knife use a generous quantity of joint substance over the taped joints as you desire to develop up the location over the tape. Taking big strokes smooth the joint substance over the tape using more pressure to the side of the taping knife even more away from the tape.

Read Full Post

Secrets to Getting Spent for Your Innovative Concepts and Proposals

Wednesday, June 21, 2017 Comments (0)

Secrets to Getting Spent for Your Innovative Concepts and Proposals

Numerous creative specialists such as occasion planners, interior designers, and decorative painters are frustrated when prospective customers take their ideas and take them to less expensive business. They provide their ideas in a proposal or presentation and later find that they didn't get the customer and their designs are being used by somebody else.

SECURE YOUR IDEAS

In order to protect your ideas and still get the customer, you have to alter how you deliver your concepts and particularly what you provide. Keep in mind, your innovative concepts are the most important part of what you do, so stop providing away for free.

The first thing you have to do to protect yourself is to focus the initial conference with the prospect on her ideas and her needs, rather than on your concepts and your suggestions. Invest a minimum of 95% of the conference asking concerns instead of presenting options and ideas.

Learn what the client desires and what she pictures. Discover why she desires exactly what she desires and discover what her experiences have remained in the past with this kind of project. Concentrate on her, not on you and your services.

Construct a relationship with the customer and release the concept that you need to place on a big show of creative concepts to impress her. Contrary to what most people believe, the customer would rather talk about what she want then pay attention to your ideas. Truly.

PRESENT THE WHAT BUT NOT THE HOW

Next, present the prospective customer with a proposal that becomes a contract once the prospect indications it. The proposal ought to include goals that the customer informed you she desired in your first conference. It needs to consist of payment terms. The proposal needs to include exactly what you will do, simply not HOW you will do it.

Let's take a look at examples of how and what:

Event Planner:
WHAT: "Incorporate an island theme in event decors, music, catering, and location."
HOW: "Use pineapple centerpieces, bamboo tables, island shaped invites, coconut seasoned cake, and an entry way filled with palm tree leaves and bananas."

<iframe width="640" height="360" src="//www.youtube.com/embed/_BHVHq_EmaE?rel=0" frameborder="0" allowfullscreen></iframe>

Interior Designer:
WHAT: Design a functional and easy-to-tidy space for usage as a living room where there is ample storage for children's games, a television, and other home entertainment.
HOW: Rubbermaid storage containers will be used in a specifically developed 17-piece wood cabinet that can be converted into a tv stand, a workspace, and table.

Wedding event Specialist:
WHAT: "Develop an intimate, upscale, night reception for approximately 40 visitors."
HOW: "Decorate center with purple flowers and linens, a four-tier chocolate and raspberry wedding event cake, and a 6-piece band.

Ornamental Painter:
WHAT: Create a jungle-themed mural for kid's bed room.
HOW: Paint walls with "garden space" green, add 25 rain forest trees throughout walls and incorporating ceiling space, paint 5 Colobus monkeys, 7 chimpanzees, a gray parrot, 9 green tree frogs, and a stream running across the door.

WHEN AND HOW TO PRESENT YOUR IDEAS

You can provide your ideas in numerous ways and still secure them.

You can provide your ideas in information after the client has signed a basic proposition with you. You need to interact with the client to develop exactly what he wants through your imaginative talents.

Another way to present your concepts is through sample boards or makings, but just after the client has either signed a proposition for the job or paid you for your ideas. If you decided to charge the customer for the samples, consent to put the payment to the quantity of the final agreement amount should the client agree to employ you to do the job. If the customer opts to utilize somebody else for the task, then a minimum of you were spent for your ideas and your recommendations.

Never ever present specific ideas, sample boards, or illustrations to a customer unless you have actually been spent for that part of the job or the customer has signed a contract. By continuing to submit ideas and official recommendations to potential clients, you are short changing yourself and your innovative talents by lowering the worth of your concepts in the mind of the buyer.

By finding out the best ways to successfully handle the very first conference with a potential customer, the best ways to safeguard your ideas, when and the best ways to provide your ideas will assist you gain better customers, better projects, and have a better income!

Build a relationship with the customer and let go of the concept that you have to put on a big program of imaginative ideas to impress her. Contrary to exactly what many people believe, the client would rather talk about exactly what she desire then listen to your ideas. Another method to provide your concepts is through sample boards or renderings, however just after the customer has either signed a proposition for the project or paid you for your ideas. If you chose to charge the client for the samples, concur to put the payment towards the amount of the last contract quantity need to the customer concur to employ you to do the task. If the customer chooses to utilize someone else for the project, then at least you were paid for your concepts and your suggestions.

Read Full Post

Why hire?? Do It Yourself With These Easy House Enhancement Tips

Wednesday, June 07, 2017 Comments (0)

Why hire?? Do It Yourself With These Easy House Enhancement Tips

Cover all surface areas properly prior to beginning an enhancement job. If you are taking down walls or cooking area cabinets, cover any surface areas that have a surface that may get scratched, consisting of floorings and neighboring walls. Make sure to utilize a dropcloth on the flooring and painter's tape with paper coverings for functions such as doorknobs and light switch face plates if you are painting.

A terrific house enhancement to make is to include French doors or moving glass doors. Not just do these doors enable more light inside, however they truly can open a location and make it appear bigger. The view of the outdoors increases the obvious volume of the space and modern-day energy-efficient doors minimize heating and air conditioning expenses.

To silence a toilet that runs periodically or has a sluggish drip into the bowl, examine the flapper and flapper seat in the bottom of the tank. Tidy the lip of the seat to guarantee that mineral accumulation isn't really avoiding the flapper from seating properly, and change the flapper if it appears used or broken.

House enhancement can be a fantastic undertaking to start, no matter how much understanding or ability you have actually associated with it. Do not be tricked by house enhancement reveals that are on T.V. There is more to house enhancement than truly huge tasks. A fantastic house enhancement to make is to include French doors or moving glass doors. As was formerly mentioned, house enhancement can be a fantastic undertaking for almost anybody to begin.

To get rid of the dust on your chandelier you initially require a set of white cotton gloves. Make sure to clean each prism with the moist glove initially and then the dry one.

House enhancement can be an excellent undertaking to start, no matter how much understanding or ability you have actually associated with it. There is more to house enhancement than truly huge tasks.

Plant some trees around your house. Trees boost in worth as they get larger and will shade your home and assistance to conserve energy.

The majority of individuals can paint a space, tidy storm windows, and make small repair works. Unless you actually understand exactly what you are doing, you are most likely to have difficulty (and come across threat) with tasks such as DIY electrical circuitry and DIY drain line replacement.

If the siding on your house is all set to be upgraded, and you wish to change it, appropriate insulation is the very first thing that you need to want. It will contribute to the resale worth of your house and conserve you on energy expenses. It will put more loan in your pocket!

As was formerly specified, house enhancement can be a terrific undertaking for almost anybody to begin. It takes a little understanding to find out the fundamentals so that you can begin enhancing properly, however you do not need to end up being a professional if you do not wish to. Simply keep those ideas in mind and begin enhancing your house!

Don't forget ... any power tool replacement parts you ... Troy Online Sales has power tool parts!!

Read Full Post

Home Decorating Projects

Wednesday, June 07, 2017 Comments (0)

Home Decorating Projects

Consider the free time available for styling the interior and decorating of the house. Home improvement projects can be time consuming especially if your skills are limited.

Browsing and visiting websites through home improvement magazines that highlight great living rooms, kitchens, dining rooms, etc. can give a home owner an idea about different themes. Home owners can also opt to buy cheaper alternatives for home decorations by buying items that are on sale or pre-owned.



Purchase inexpensive tools and materials needed for home improvement and decoration. Estimate the expenses that will be incurred by the remodeling and decoration of the home.

When doing your own the home decorating, here are some factors to consider.

There are easy tasks and repairs that require a minimum of time and skill. If possible, to save more money and avoid purchasing new materials which are not needed avoid hiring a contractor.

You need to think beyond the basics if you're seriously interested in knowing about home decorating. This informative article takes a closer look at things you need to know about home decorating.



Most Americans are spending a fortune decorating their homes for Christmas, Easter, and Thanksgiving when they can follow these simple tips and do it for less. Home improvement projects can be budgeted and planned.

Truthfully, the only difference between you and home decorating experts is time. You'll be that much nearer to expert status when it comes to home decorating if you'll invest a little more time in reading.

4. Assess your skills in styling and decorating before starting the project: if the task requires a high level of artistry that you do not possess the end result may not be the one you desired and you may spend even more money to correct the work.



Don't limit yourself by refusing to learn the details about home decorating. The more you know, the easier it will be to focus on what's important.

Rearranging the furniture can be the cheapest way to decorate your home. Instead of buying a sofa, consider buying two loveseats especially if space is limited.

Most Americans are spending a fortune decorating their homes for Christmas, Easter, and Thanksgiving when they can follow these simple tips and do it for less. Browsing and visiting websites through home improvement magazines that highlight great living rooms, kitchens, dining rooms, etc. can give a home owner an idea about different themes. Home owners can also opt to buy cheaper alternatives for home decorations by buying items that are on sale or pre-owned.

Determine the specific areas where repairs are needed: repairs can range from leaking pipes, clogged drains, to minor carpentry repairs. When decorating the home, it is not necessary to do all the parts of the house. Buying wholesale, when possible, will give the buyer huge discounts in comparison to buying in retail stores.



Because it reflects the personality of the homeowner, everyone loves a nice appearing home. If the home is orderly and pleasant, going home at the end of long working day is worth looking forward to.

Purchase inexpensive tools and materials needed for home improvement and decoration. When decorating the home, it is not necessary to do all the parts of the house.

If the last option is to hire a professional interior designer, determine his background and work experience before hiring. Consider designers who are referred by a friend or by your neighbors.

Read Full Post

Corian Design Counters: A Do-it-Yourself Job?

Wednesday, June 07, 2017 Comments (21)

Corian Design Counters: A Do-it-Yourself Job?

Changing your counter tops might provide you stop briefly - specifically if you're looking to update to Corian design counters. Typically, suppliers and producers have actually held the reins on Corian design counters, firmly insisting on an expert setup that can cost up to $80 per square foot. Now, nevertheless, Corian design counters - understood more generically as strong surface area counters or strong surface area cooking area tops - are offered in fairly simple DIY packages.



Why Corian Style Counters?

Corian strong surface area counters have a number of benefits. Second, Corian counters are strong surface area sheets, suggesting that the Corian colors go all the method through. Third, Corian design counters are more flexible than tile when it comes to damage.



Starting

Corian prices can be as much as $80 per square foot, while diy strong surface area counters are about half that. While the real setup procedure may not be difficult, it's essential that you properly compute the length of the Corian design counters you'll require.

Determining For Materials



Many kitchen areas are either straight tops or consist of signing up with 2 tops at a 90-degree corner. To figure out the quantity of strong surface area counter you require, determine the length of your existing counter tops. In this example, you would require 16 lineal feet of counter top.

Now, nevertheless, Corian design counters - understood more generically as strong surface area counters or strong surface area kitchen area tops - are offered in reasonably simple diy sets.



New Corian design counters will offer your kitchen area a fresh appearance and will last apparently permanently. You should not have an issue setting up Corian design counters yourself if you're useful with woodworking. Spruce and take the plunge up your kitchen area!

Corian strong surface area counters have a number of benefits. Second, Corian counters are strong surface area sheets, implying that the Corian colors go all the method through. Corian rates can be as much as $80 per square foot, while diy strong surface area counters are about half that. New Corian design counters will provide your cooking area fresh appearance and will last apparently permanently.

Don't forget ... any power tool replacement parts you ... Troy Online Sales has power tool parts!!

Read Full Post

Improve your Home by Building a Deck

Wednesday, June 07, 2017 Comments (0)

Improve your Home by Building a Deck

Posts should be obvious, but concrete footings may perplex someone that is not experienced in improving their home. The footings are only supporters. Coupled with anchors, footings control the weight of the top deck.

Thus, if you choose to go the long route and complete the deck from the beginning it is important to know each part and how they connect to other parts.

The railing supplies will also be included in the kit and will have resources including balusters, rail posts, and caps. The rails will be obvious.



When improving your home learn those tech terms instead of going into debt. Amazingly, many homeowners will take out another loan against their home for home improvement and some will even hire pros to take care of the improvements while not realizing the financial harm they do to them self.

Thus, the joists connect the deck to the other parts. Next, you will want to begin the handling of building your deck for home improvement.

Building a deck is not one of the harder home improvement tasks. You will want posts, ledgers, beams, joists, hammer, and a few other tools and resources to get going on building a deck to improve your home. You will also want ledgers, railing parts, concrete footing, decking, stairway, and railing parts.

Beams are connectors in basic terms. The beams attach to the deck holding it in place and look like two long pieces of ply boards with crutches at the bottom, and spacing in the medium of the linked boards.

The ledgers attach the house and deck, while supporting the joists. Thus, the kit has instructions that will direct you through the steps of building your brand new deck.



Joists are supporters. Thus, the joists connect the deck to the other parts. In plain terms you can think joists as this part is linked to this part song to get an idea what joists are.

Stopping here, we want to think details of home improvement. Does not matter what you intend to do to your home; you will want to prepare a budget. The preparation will show you through the procedure of improving your home and avoid interrupting your flow.

Hopefully after you have read the first part of this article, you have gained a little more knowledge about deck building. Continue to read the article and learn more about deck building.

When improving your home you must think safety and the possibilities to elude problems.



Learning about building decks and home improvement will help you increase the value of your home more in the long run than you may realize. If a deck is for you and your home, use this article to help to decide.

Building a deck is a fun home improvement task. Thus, once you get going you will enjoy the construction process, because it will make you feel good about yourself.

Building a deck is not one of the harder home improvement tasks. You will want posts, ledgers, beams, joists, hammer, and a few other tools and resources to get going on building a deck to improve your home. You will also want ledgers, railing parts, concrete footing, decking, stairway, and railing parts.

One of the harder deals of building a deck is the uncertainty in technical terms, and that includes joists. Some people see the name joist and run the other way, right into hiring a professional who charges hundreds of dollars for a plain home improvement job that could cost as little as hundred bucks take or give.

The decks are structured something like this: decking, cap, rail, railing post, joist hanger, ledger, baluster, tread, stringer, staircase post, outside joist, post anchor, deck post, beam, concrete footing, header joist, joist, facing board, and baluster.



The next time someone asks you about deck building and home improvement, you can give a little smile and provide them with an informative answer.

Next, you will want to begin the handling of building your deck for home improvement. It is important to stick to the instructions carefully, otherwise, you may construct a faulty deck that could get you sued, and/or hurt.

Some kits may even have the staircase put together, therefore it only takes a few connections to add it to the deck. Otherwise, you will want to put the part together yourself, therefore learning that terms to stick to instructions may help you get done with little problems. The stairs on most decks are regularly put together with stringers, treads, and metal cleats.

Home improvement enhances any home, especially if you are trying to improve the exterior of the home as well as the interior of the home.

Read Full Post

Home Improvement Tips 2

Thursday, March 30, 2017 Comments (0)

Top Tips On Sensible Home Improvement


Home improvement projects are easy to complete when you research them ahead of time and prepare yourself well. Here are some great ideas for doing home improvement work without the hassle:



Find ways to decrease your water consumption, thereby decreasing your water bill. Make sure water children are instructed to be careful to not leave water faucets on when not in use.

When you are painting a room, it is important to cover the floor. , if paint drips onto a hard wood carpet, tile or floor it can be very difficult to clean the area.. To avoid accidents from happening you can lay old sheets, blankets or drop cloths on the floor so that the paint drips on them rather than the floor.

Simply installing additional lighting can give new life to a room. A bright kitchen not only makes it easier to cook, but can liven the whole house, and a well lit bathroom can seem much larger than it really is.



Installing tile can be a very time costly and consuming job so you need to make sure to do it. Make sure that you properly seal the grout when you are doing the tile, because if you don't it can absorb water, dirt, and different types of stains.

Look for cracks or shifting of your home's concrete slabs or driveway. Slabs on the exterior should always be positioned so that any drainage that occurs faces away from your home's foundation.



Always get the best materials you can afford if you are improving a home that you plan to live in for the rest of your life. While 10 years may sound like a long time, ask yourself if you really want to be doing this project again down the road, and opt for materials with a lifetime warranty instead.

While attending to home improvement on any property, remember that while personalizing a room to your own individual taste is great, the expense may not necessarily be recouped at the time of resale. Expensive wallpapers or tiles that suit your taste may be viewed for discarding by the next purchaser and therefore the cost will not be recovered.

Hopefully this info will make your next project a breeze. Not only is it easy to complete home improvement projects when you do them right, it can be addictive, too.



Home improvement is not just for dedicated enthusiasts. Any homeowner can increase the value and appeal of his or her home with some simple projects. Home improvement projects are easy to complete when you research them ahead of time and prepare yourself well. Here are some great ideas for doing home improvement work without the hassle:

Not only is it easy to complete home improvement projects when you do them right, it can be addictive, too.  
With a little guidance, tackling home improvement projects can be a simple, affordable, and effective way to increase the value of your property while making it a more efficient and pleasant place to live. Here you will find some useful tips and tricks for choosing and completing your next major project.



Even if you only want to complete a minor project, you will be more successful if you follow the advice in this article. This information is sure to help you as you map out your next project, whether it's for the bathroom, bedroom, kitchen, or even your front and back lawn.

To make the roof on your real estate last as long as possible you should make sure there are power vents installed to draw hot air out of the attic space. This will keep the underside of the roof cooled down so that it does not cook your shingles the way a frying pan cooks and egg.



Fun fact, most dishwashers, when full, are actually more efficient than washing dishes by hand. If you are looking into buying a new appliance for your home, consider a dishwasher.

When working with power tools, always read the instruction manuals in regards to the specific tool you are working with. Understand and read how it works before plugging it in if you do not know how or have very little experience working with a tool. Power tools are very dangerous so understand them before operation.



Before tackling any kind of project involving your walls-- even hanging a painting-- make sure that you know what kind of wall you are dealing with. Some wall materials require special treatment and particular kinds of wall anchors in order to support an object hanging from it, and being careless can result in cracks or crumbling plaster.

Adding a new room to your house can recoup from fifty to eighty percent of it's cost in increased home value, so it's definitely worth the expenditure. Consider adding a bedroom if your house only has one or two, or a conservatory off your kitchen so you can enjoy your morning coffee in leisure.



When you are fixing up your real estate, don't waste money buying commercially made primer paint. Go to your local home improvement store and buy several cans of the paint that they mixed that someone did not like.

Consider installing a water filtration system in your kitchen. Think of the money you spend on bottled water; that money can go back into your pocket with the installation of a quality filtration system. When you sell, they are a relatively inexpensive improvement to make and will add a great selling point to your home.



When you are fixing up your real estate, don't waste money buying commercially made primer paint. Go to your local home improvement store and buy several cans of the paint that they mixed that someone did not like. They are a relatively inexpensive improvement to make and will add a great selling point to your home when you sell.

If you are looking into buying a new appliance for your home, consider a dishwasher.

Read Full Post

Air Tool Guy

Thursday, March 30, 2017 Comments (0)

Air Tool Guy is your destination of everything related to Home Improvement tools. The blog originally covers only air compressor, and has grown to include more and more tools. You will find lots of buying guides and in-depth reviews for tools you are using, or going to buy.

 

We also blog about our tips and tricks in using the tools for various DIY Home project.

 

http://airtoolguy.com/

Read Full Post

DeWalt FlexVolt 120V Max Sliding Miter Saw

Wednesday, March 29, 2017 Comments (9069)

Check out the new DeWalt FlexVolt miter saw!  Here's a link that describes it well and this tool look awesome for it's power and portablility ...

http://www.protoolreviews.com/tools/power/cordless/saws-cordless/dewalt-flexvolt-120v-max-sliding-miter-saw/25440/

Read Full Post

Milwaukee Tool Tracking

Wednesday, March 29, 2017 Comments (0)

I love this chip tracker that Milwaukee has installed in your drill, saw, etc and let's you find your power tools from your phone.

Ever lend out a tool and not get it back - yup, that's annoying.

Have a look here:

http://www.coptool.com/tool-tracking-lost-found-with-milwaukee-one-key/

Read Full Post